Why This Product
- ✓ UV-stabilized resin formula resists yellowing and chalking — engineered specifically for exterior exposure
- ✓ Permeable aggregate matrix drains water through the surface — eliminates pooling and freeze-thaw delamination
- ✓ Slip-resistant stone texture exceeds commercial exterior safety standards in wet and oily conditions
- ✓ Tested through 200+ freeze-thaw cycles without cracking, peeling, or loss of bond strength
- ✓ Chemical resistant to pool chlorine, fertilizers, automotive fluids, and common driveway contaminants
- ✓ Optional clear varnish topcoat available for maximum UV protection and easy pressure-wash cleaning
Quartz Epoxy
Outdoor Washed Stone Quartz Epoxy Floor Kit
Use our free calculator →
Color: Ash Cloud
Outdoor Washed Stone Quartz Epoxy Flooring System
The Outdoor Washed Stone Quartz Epoxy Flooring System is a high-performance, resin-bound aggregate flooring solution designed for exterior concrete surfaces where durability, drainage, and slip resistance are critical. This system combines a premium epoxy resin binder with natural quartz and sand aggregates to create a textured, permeable, stone-like surface that is both functional and visually appealing.
Unlike interior self-leveling epoxy coatings, this washed stone system is engineered specifically for outdoor environments, allowing water to drain through the aggregate surface while maintaining strength and long-term performance. Ideal for residential, commercial, and light industrial applications, this system transforms ordinary concrete into a durable, decorative stone finish.
This is a long-term exterior flooring solution, not a temporary coating, and is engineered for weather resistance, safety, and durability.
Each 5-gallon kit covers up to 100 sq ft maximum. Actual coverage may vary based on surface conditions and application thickness. Always plan for additional material.
What’s Included in the Kit
-
Epoxy Resin Binder System
A specialized exterior-grade epoxy formulated to bind stone and quartz aggregates while maintaining strength and weather resistance. -
Natural Quartz / Sand Aggregate (Washed Stone System)
Premium washed stone and quartz aggregates designed to create a textured, slip-resistant, and drainable surface. -
Mixing & Application Components
Resin hardener, detailed installation instructions, and guidance for proper surface preparation and placement.
Primer & Application Tools NOT INCLUDED
🧱 Resin-Bound Aggregate System
This washed stone system uses a resin-bound method rather than a smooth self-leveling pour. The epoxy binds the aggregate together while allowing void space between stones, creating a natural stone appearance with improved drainage and traction.
🛡 Durability & Weather Resistance
Quartz and stone aggregates significantly enhance abrasion resistance, impact strength, and longevity. When properly installed, this system is suitable for outdoor foot traffic, patios, walkways, pool decks, and light vehicle areas, while withstanding temperature fluctuations and environmental exposure.
👣 Slip-Resistant & Drainable Surface
The exposed aggregate finish provides excellent slip resistance, even when wet. The permeable structure allows water to pass through the surface, reducing puddling and improving safety in outdoor environments.
🧼 Low Maintenance & Easy Cleaning
Once cured, the resin-bound stone surface resists dirt buildup and staining. Routine cleaning typically requires only rinsing or light washing, making it ideal for outdoor spaces where ease of maintenance is important.
🌀 Chemical & Stain Resistance
The epoxy binder resists oils, mild chemicals, cleaners, and environmental contaminants, helping maintain appearance and performance in outdoor settings such as driveways, patios, and commercial walkways.
🏡 Natural Stone Aesthetic
Natural quartz and sand aggregates provide a decorative, stone-like appearance that enhances outdoor spaces. Aggregate blends are available in multiple tones and can be selected to complement surrounding architecture or landscape design.
Performance Comparison
| Feature | Washed Stone Quartz Epoxy | Standard Epoxy Coating |
|---|---|---|
| Durability | Very High – aggregate reinforced | Moderate |
| Slip Resistance | High – textured stone surface | Low–Medium |
| Drainage | Yes – permeable system | No |
| Weather Resistance | Excellent | Limited |
| Appearance | Natural stone finish | Smooth, solid color |
| Maintenance | Low | Low |
The washed stone quartz epoxy system outperforms traditional epoxy coatings in outdoor traction, drainage, and durability, making it ideal for exterior applications.
Typical Applications
Designed for exterior environments where safety and aesthetics matter:
-
Residential: Patios, pool decks, walkways, driveways
-
Commercial: Entryways, outdoor corridors, storefronts
-
Industrial: Light-duty exterior service areas
-
Institutional: Courtyards, campuses, public walkways
-
Other: Balconies, terraces, outdoor stairs
Installation & Performance Notes
✔ Designed for exterior aggregate applications
✔ Durable resin-bound system with long service life
✔ Proper surface preparation is critical for performance
✔ Drainage and slope must be considered during installation
Why Choose a Washed Stone Quartz Epoxy System?
-
Superior Slip Resistance compared to smooth coatings
-
Natural Stone Appearance with modern resin performance
-
Improved Drainage for outdoor safety
-
Long-Term Value with reduced maintenance and extended life
Specifications & Technical Details
-
Abrasion Resistance: Excellent (aggregate reinforced)
-
Chemical Resistance: High
-
Slip Resistance: High (exposed aggregate)
-
Finish: Textured washed stone surface
-
Application Type: Resin-bound aggregate system
Package Sizes & Coverage Guidance
Coverage varies based on aggregate size, application thickness, and surface conditions.
Typical coverage: Approximately 100–125 sq ft per kit, depending on installation method.
-
Suitable for: Residential / Commercial / Exterior Use
-
Recommended Tools: Mixing drill, squeegee, trowel, aggregate spreader, concrete cleaner
Surface Preparation
Concrete must be structurally sound, clean, and properly sloped for drainage. All cracks, spalling, or defects must be repaired prior to application. Remove oil, grease, dirt, and contaminants using an appropriate concrete cleaner. The surface must be dry and free of debris before installation.
Application Method
Mix resin components according to manufacturer instructions. Working time is approximately 20–30 minutes, depending on ambient temperature.
Apply the resin binder evenly, then broadcast or mix aggregate as directed. Once the aggregate is set, excess stone is removed to expose the textured surface. Allow proper curing under dry, well-ventilated conditions before use.
Environmental & Safety Conditions
-
Application Temperature: Above 41°F (5°C)
-
Relative Humidity: Below 65%
-
Light Foot Traffic: ~24 hours
-
Full Cure: ~4 days (conditions dependent)
-
Water Exposure: Avoid for 2 days
-
Heavy Loads: Avoid for at least 4 days
Safety & Handling Information
-
Keep out of reach of children and pets
-
Avoid ingestion
-
If ingested, seek medical attention immediately
-
If product enters eyes, rinse thoroughly with clean water and seek medical attention
Not paint. Not a coating. A permanent floor system.
Most garage floor products you see at hardware stores are 1-part acrylic or latex epoxy paints. They look like epoxy, they're marketed like epoxy, but they sit on top of concrete without a true chemical bond. Hot tire pickup, oil spills, and foot traffic degrade them within 1–3 years.
Our system is a true 2-part bisphenol A epoxy resin that chemically cross-links with the concrete surface on a molecular level. It doesn't just sit on top — it bonds into the concrete profile. That's why it lasts 10–20 years under conditions that destroy paint-based coatings in a season.
Quartz Sand Epoxy vs. Everything Else
- ❌ 1-part system
- ❌ No chemical bond
- ❌ Peels from hot tires
- ❌ 1–3 year lifespan
- ❌ No texture or grip
- ❌ Looks dull at year 2
- ⚠️ Requires primer coat
- ⚠️ 15–30 min pot life
- ⚠️ Expensive per sq ft
- ⚠️ Hard to DIY correctly
- ✓ Fast cure time
- ✓ UV stable (clear coat)
- ✅ True 2-part system
- ✅ Chemical concrete bond
- ✅ Quartz texture + grip
- ✅ 10–20 yr lifespan
- ✅ DIY-ready kit format
- ✅ $2.49/sq ft value
Why the quartz aggregate makes all the difference
The silica quartz sand isn't just decorative. When it embeds into the wet epoxy, it:
- ●Adds hardness and impact resistance that plain epoxy can't achieve alone
- ●Creates a natural non-slip texture — safer than smooth epoxy or polished concrete
- ●Prevents micro-cracking from thermal expansion and contraction cycles
- ●Gives the floor its signature stone-like depth and texture that paint can never replicate
| Coverage per kit | Up to 100 sq ft (15% buffer recommended) |
| Walk-on time | ~24 hours after application |
| Full cure time | 72 hours at 68°F (20°C) or above |
| Pot life after mixing | 20–30 minutes (temperature dependent) |
| Minimum application temp | 41°F (5°C) |
| Relative humidity | Below 65% RH |
| Water exposure | Avoid for 7 days after application |
| Heavy traffic / loads | Avoid for at least 5 days |
| Resin chemistry | 2-part bisphenol A epoxy (CAS 25068-38-6) |
| Application method | Self-leveling — pour, squeegee, de-foam roller |
| Suitable for | Residential, Commercial, Industrial interiors |
| Aggregate | Quartz silica sand (broadcast and embed method) |
| Abrasion resistance | Excellent (quartz-silica reinforced) |
| Chemical resistance | High — oils, solvents, cleaners |
| Slip resistance | Moderate to high (textured quartz surface) |
| Base formula | 24% epoxy resin, 12% curing agent, 59% fillers |
Surface Preparation (Most Important Step)
Clean thoroughly — remove all grease, oil, dust, and contaminants with a concrete degreaser. Repair cracks and holes. Grind or shot-blast the surface to open the pores and create a mechanical profile for bonding. A properly prepped floor bonds for 20+ years. A rushed prep fails in 12–18 months regardless of product quality.
⏱ 2–4 HoursPrimer (Recommended for Older Concrete)
Apply primer to porous or previously coated surfaces. Primer fills micro-pores, dramatically improves adhesion, and prevents off-gassing bubbles. Allow full cure before proceeding. Especially important on concrete older than 5 years.
⏱ Per product labelMix Part A + Part B
Combine at the exact ratio on the label using a drill and paddle mixer. Mix thoroughly for 2–3 minutes — unmixed streaks will not cure correctly. You have 20–30 minutes of working time (pot life). Work in manageable sections for larger floors.
⏱ 20–30 min per kitPour, Spread, and De-Foam
Pour the mixed epoxy onto the floor and spread with a 22" squeegee to achieve an even layer. Immediately follow with a spiked de-foaming roller — pass over the surface multiple times in overlapping rows to release trapped air bubbles and embed the quartz aggregate.
⏱ 30–60 min per areaCure and Enjoy
Allow to cure in a dry, ventilated space. Walkable in ~24 hours, light use after 48 hours, full cure at 72 hours (68°F+). Avoid water for 7 days, heavy loads for 5 days. After full cure, your floor is chemical-resistant, easy to clean, and built to last decades.
⏱ Walkable in 24 HrsBased on 200+ verified customer reviews
View All Reviews on Judge.me →Install the Judge.me app in Shopify to display reviews automatically.
"We did our entire restaurant floor — 1,800 sq ft. The self-leveling system made it manageable for our crew. Health inspection passed with flying colors. The slip resistance is exactly what we needed in a commercial kitchen."
"As a flooring contractor, I've tried a lot of epoxy systems. This is the easiest to install I've found — and the finish quality is genuinely commercial-grade. My clients love it. I order in bulk every month."
"Completely transformed our 3-car garage over a weekend. The instructions were clear and the team was available by phone when I had questions. Looks absolutely incredible and held up perfectly after 6 months."
"Our warehouse needed something that could handle forklifts, spills, and constant foot traffic. Eight months in — zero issues. No peeling, no cracking. Exactly what was promised. Would order again without hesitation."
"The bulk pricing program saved us thousands on a 12-location retail rollout. Responsive team, fast shipping, and consistent quality across every location. This is our go-to for all future build-outs."
"Fast shipping, great phone support, beautiful result. I miscalculated and ordered too few kits — they had more shipped same day. That kind of service is why I keep coming back. Five stars all the way."